Files
ProcessControl/conv/03-part-III.md
T

24 KiB
Raw Blame History

Conversation Log — Part III — Make It Actually Distributed · Steps 19–27 (turns 45–)

⬅ Previous: Part II · Index · Next: Part IV ➡

All parts: Setup & Step 0 · Part I · Part II · Part III · Part IV · Part V · Part VI · Part VII · Parts VIII & IX


[45] Student

before doing step 20 i need to syncthing (step 19), as there is only debian and ubuntu how to do it again to install it on my arch?

[45] Tutor — actions taken

  • Created this Part III log file, regenerated the nav blocks in all part files, and updated the index in conv.md.
  • Read README lines 1289–1413 (Step 21 "Prepare a Shared Course Folder", Step 22 "Verify Syncthing Before Starting the System", Step 23 "Important: Syncthing Is Not a Shared Atomic Filesystem"), so the install advice matches what those steps need.
  • Read-only: pacman -Si syncthing → official Arch package syncthing 2.1.5-1 in the extra repo, depends only on glibc and sqlite. (Earlier: not installed on this machine.) pacman -Fl returned nothing because the file database isn't synced, so I could not check which systemd unit files the package ships.
  • Nothing installed. Installing changes the student's system, so the student runs the commands.

[45] Tutor — reply

Detour: installing Syncthing on Arch. This belongs to Step 21 ("On every participating computer: install and start Syncthing"). Step 19 only names the tool.

You don't need the Debian/Ubuntu packages. Syncthing is in Arch's official extra repo (observed: syncthing 2.1.5-1).

1. Install and check (you run these, since they change your system):

sudo pacman -S syncthing
syncthing --version

2. See how the package lets you start it. I couldn't check this from here:

pacman -Ql syncthing | grep systemd

3. Start it. Pick one of two ways:

  • Foreground, simplest for a first try: run syncthing in a terminal. It stops when you close that terminal. (Syncthing 2.x reorganised its command line into subcommands. If bare syncthing complains, syncthing --help lists them.)
  • Background, keeps running: if step 2 shows a user unit (a file under /usr/lib/systemd/user/), use systemctl --user enable --now <that unit name>.

4. Open the web GUI: Syncthing's default address is http://127.0.0.1:8384. Adding devices and sharing a folder (Step 21, items 2–4) happens there.

Repeat on every other machine you'll use. For Step 21 you need at least two, so the machine question from before still matters.

Back to Step 19–20 when Syncthing runs. Tell me:

  1. the output of syncthing --version and of the pacman -Ql line;
  2. which machines you'll connect;
  3. still open: why is Syncthing not a message broker, even though messages travel through it?

Progress record

  • Current step: 19–20 (Part III), detour: installing Syncthing
  • Last observed result: syncthing 2.1.5-1 available in extra; not installed yet
  • Unresolved problem: which machines to connect; unit file name not verified
  • Next action: student installs Syncthing, reports version + unit files, names the machines, answers the "not a broker" question

[46] Student

[#user@#laptop ProcessControl]$ sudo pacman -S synchting
[sudo] password for matsune:
error: target not found: synchting
[#user@#laptop ProcessControl]$ pacman -Ql syncthing | grep systemd
error: package 'syncthing' was not found
[#user@#laptop ProcessControl]$

[46] Tutor — actions taken

  • None. Compared the typed package name with the one pacman -Si reported earlier (syncthing).

[46] Tutor — reply

Observed: the install command asked for synchting (c-h-t), but the package is syncthing (c-t-h: sync + thing). pacman found no such target and installed nothing. That's why the second command says package 'syncthing' was not found: it's correct, just not installed yet.

Retry with the right spelling:

sudo pacman -S syncthing
syncthing --version
pacman -Ql syncthing | grep systemd

Tell me: the output of the last two commands.

Progress record

  • Current step: 19–20 (Part III), detour: installing Syncthing
  • Last observed result: install failed because of a typo in the package name (synchting)
  • Unresolved problem: which machines to connect; "not a broker" question still open
  • Next action: student reruns the install with syncthing and sends the version + unit files

[47] Student

[#user@#laptop ProcessControl]$ syncthing --version
syncthing v2.1.5 "Hafnium Hornet" (go1.27.0-X:nodwarf5 linux-amd64) syncthing@archlinux 2026-09-08 10:28:56 UTC [libsqlite3, noupgrade]
[#user@#laptop ProcessControl]$

[47] Tutor — actions taken

  • Read-only, since the pacman -Ql output wasn't pasted: pacman -Ql syncthing lists /usr/bin/syncthing, a system template unit /usr/lib/systemd/system/syncthing@.service, and a user unit /usr/lib/systemd/user/syncthing.service.
  • systemctl --user is-enabled syncthing.service → disabled; is-active → inactive. Nothing was enabled or started. That changes the student's user configuration, so the student runs it.

[47] Tutor — reply

✅ Observed: Syncthing v2.1.5 is installed. I checked the unit files myself: the package ships a user unit, syncthing.service, currently disabled and inactive.

Start it (your choice):

  • Background, starts with your session (recommended, since the message board has to sync while your Java programs run):
    systemctl --user enable --now syncthing.service
    systemctl --user status syncthing.service
    
    To undo later: systemctl --user disable --now syncthing.service.
  • Foreground, for a one-off try: run syncthing in a terminal and leave it open.

Then open http://127.0.0.1:8384 in a browser. You should see the Syncthing web GUI with your own device.

Still needed before Step 21 can work:

  1. A second machine with Syncthing, since Step 21 connects devices. Which one will you use?
  2. The open Step 20 question: why is Syncthing not a message broker, even though messages travel through it?

Tell me: whether the GUI opens (and the status line saying active (running), if you used the service), plus answers 1 and 2.

Progress record

  • Current step: 19–20 (Part III), detour: installing Syncthing
  • Last observed result: syncthing v2.1.5 installed; user unit syncthing.service present, disabled/inactive
  • Unresolved problem: second machine unknown; "not a broker" question open
  • Next action: student starts Syncthing, opens the GUI, names the second machine, answers the broker question

[48] Student (2026-09-24)

can you move the ProcessControl folder from /GitRepo/UniFr/ComputerScience/ to /GitRepo/Notes/ProcessControl? (including the conv)

[48] Tutor — actions taken

  • Looked before touching anything: /GitRepo/Notes/ProcessControl already existed (created 22 Sep 14:56) and was a second clone of the same repo — same branch main, same HEAD e079932, same remote, same uncommitted log edits, no stashes, no extra branches.
  • diff -rq between the two: every working file byte-identical, including conv/ and conv/03-part-III.md. Only .git/config differed (the Notes copy has a VS Code vscode-merge-base = origin/main line) and .git/index (timestamps).
  • Checked the parent repo UniFr/ComputerScience: ProcessControl was only ever untracked there (?? ProcessControl/), so nothing tracked depended on it.
  • Asked the student how to finish, since the destination was occupied and finishing meant deleting a directory. Answer: delete the old folder.
  • Re-verified both trees were identical, then rm -rf /mnt/data/Documents/GitRepo/UniFr/ComputerScience/ProcessControl. Confirmed it's gone and the Notes copy is intact (## main...origin/main, same 5 pending log changes).
  • Copied the session's project memories (tutor rules, schedule tracking, log layout) to ~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/memory/, a guess at the new project key, so a future session in the new path still has them. The originals were left in place.
  • This log entry is written in the surviving copy under /GitRepo/Notes/ProcessControl.

[48] Tutor — reply

Done. The folder now lives only at /GitRepo/Notes/ProcessControl, with conv.md, conv/ and the git history.

Notes for you:

  • Your Notes repo sees ProcessControl/ as an untracked embedded repository. If you ever run git add . in Notes/, git will warn and record only a pointer. I can add ProcessControl/ to Notes/.gitignore if you want.
  • Uncommitted work travelled with the folder: the log edits for turns 41–48 are still uncommitted here.
  • I copied my saved project notes to a path matching the new location. If a future session seems to have forgotten the tutoring rules (no answer pre-filling, schedule reminders, per-part log), say so and I'll fix the path.

Progress record

  • Current step: 19–20 (Part III), Syncthing detour
  • Last observed result: folder moved (old copy deleted after verifying the new one was identical); Syncthing v2.1.5 installed, user unit disabled/inactive
  • Unresolved problem: Syncthing not started yet; second machine unknown; "not a broker" question open
  • Next action: student starts Syncthing, opens http://127.0.0.1:8384, names the second machine, answers the broker question

[49] Student

Base on the siblings folder, can you start doing resume/construct quarto course (3lang, OG = English, french and german to do) and add each time I end a step the summary, with diagram (interactive one for the web version)?

[49] Tutor — actions taken

  • Studied the sibling courses in Notes/: the _course template (NEW-COURSE.md), the shared notes extension (i18n.lua, glossary, exercises), Analysis (first multilingual course, TikZ figures, an animated html-only figure) and Database — the closest model: English default profile, _output/ + _output/fr/ + _output/de/, i18n.yml, and a figure pipeline of hand-written SVG sources with {{key}} labels built per language to svg (web) and pdf (print).
  • Asked four questions (book at the repo root · one chapter per tutorial part · Database figure pipeline plus a JS layer · write all three languages now). All four answered with the recommended option.
  • Copied the shared boilerplate from Database: _extensions/notes/, _i18n-switcher.html, theme.scss, figures/build-figures.py, figures/diagram.css.
  • Wrote the project: _quarto.yml (+ _quarto-en.yml, _quarto-fr.yml, _quarto-de.yml), render-all.sh, .gitignore, preamble.tex, i18n.yml.
  • Wrote three diagrams as SVG sources with {{key}} labels and per-language strings in figures/labels.yml: direct-calls, mailboxes-jvm, filesystem-processes (8 flow hops and 9 nodes each for the last two).
  • Wrote figures/flow-player.html: for every img.flow-figure it fetches the built svg, inlines it and adds a Play / One hop / Reset bar that walks a message along the data-flow edges, lighting up each data-flow-node it reaches. The pdf and a browser without JavaScript keep the same still picture.
  • Wrote the chapters: index.qmd (about, how to read the diagrams, how to build), 00-orientation.qmd (step 0), 01-part-i-calls.qmd (steps 1–10) and 02-part-ii-processes.qmd (steps 11–18), each in English, French and German, with the observations from our own runs.
  • Fixed two build problems found on the way: invalid -- inside the svg comments (rsvg-convert refused the files) and hex link colours that xcolor rejected (now named colours defined in preamble.tex).
  • Verified: ./render-all.sh builds all six outputs (html + pdf for en/fr/de). Each book pulls its own language's figures; the sidebar titles are translated. Known cosmetic limitation, identical in the Database book: the pagination links' aria-label still shows the raw [..]{.en}[..]{.fr}[..]{.de} heading, because Quarto reads those before the filters run.
  • Not verified: the animation itself in a real browser. Nothing else depends on it.

[49] Tutor — reply

The book exists and builds in all three languages. Summary of what was created, what was verified, and how the per-step routine works from now on. Nothing was committed yet.

Progress record

  • Current step: 19–20 (Part III) — the tutorial itself is untouched by this work
  • Last observed result: ./render-all.sh built html + pdf for en, fr and de (six outputs)
  • Unresolved problem: the flow animation is not verified in a browser; deployment (Gitea hook + Caddy) not set up for this course
  • Next action: student checks the book in a browser (./render-all.sh --serve), says whether to commit, and continues the Syncthing detour for Step 19–20

[50] Student

is it possible to move this chat (the one i launch with claude --resume) to the new folder too as the folder no longer exists?

[50] Tutor — actions taken

  • Inspected ~/.claude/projects/: the old key -mnt-data-Documents-GitRepo-UniFr-ComputerScience-ProcessControl/ held this live session 37a0236e-…jsonl (4.0 MB, still growing), an earlier session 7a7a8220-…jsonl with its custom-title.json sidecar, and the memory/ folder (already copied on 24 Sep). The new key -mnt-data-Documents-GitRepo-Notes-ProcessControl/ held only memory/.
  • Hard-linked the live transcript into the new project folder (verified: same inode 46550777, link count 2), so it keeps growing under both names while this session runs.
  • Copied the earlier session's .jsonl and its sidecar directory to the new folder. Nothing was deleted; the old folder still holds its copies.
  • Checked ~/.claude.json: both path keys exist, both with hasTrustDialogAccepted: true and an empty allowedTools, no MCP servers. Nothing worth migrating, so the file was left untouched. Only lastSessionId is missing for the new path, and Claude Code writes that for the current working directory when the session ends.

[50] Tutor — reply

Yes — done, and this session is now resumable from the new folder.

Progress record

  • Current step: 19–20 (Part III), Syncthing detour
  • Last observed result: session transcripts linked/copied into ~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/
  • Unresolved problem: old transcript copies still in place (student's call whether to delete)
  • Next action: student resumes from the new folder if they like, and continues the Syncthing setup

[51] Student

Quick question, is possible to have java terminal inside the Quarto file to run the code directly there?

[51] Tutor — actions taken

  • Found the house precedent: FuncLogProg/_extensions/elixir/ (elixir-run.lua, runner.exs, elixir-run.css) runs ```{.elixir .run} blocks at render time, prints the output under the block, caches results in .elixir-cache/, and degrades to plain code when elixir is missing. Read the filter in full.
  • Read-only checks on this machine: jshell 26.0.2.1 present, java present, Jupyter has only a python3 kernel (no IJava), asciinema not installed.

[51] Tutor — reply

Answered: a live terminal in the page needs a backend or WASM and cannot run this course's programs; a render-time .run block for Java is the practical option, modelled on the existing Elixir filter. Offered to build _extensions/java/java-run.lua.

Progress record

  • Current step: 19–20 (Part III), Syncthing detour
  • Last observed result: Elixir run-filter pattern identified as the model; jshell/java available, no IJava kernel
  • Unresolved problem: student's decision on whether to build the Java run filter
  • Next action: student says yes/no to java-run, then back to Syncthing

[52] Student

no thx, thx 4 the explanation

[52] Tutor — actions taken

  • None. No java-run filter is being built; the chapters keep showing commands with their observed output as text.

[52] Tutor — reply

Noted, nothing built. Back to the Syncthing detour for Steps 19–20.

Progress record

  • Current step: 19–20 (Part III), Syncthing detour
  • Last observed result: syncthing v2.1.5 installed; user unit syncthing.service present but disabled and inactive
  • Unresolved problem: Syncthing not started; second machine unknown; "why Syncthing is not a message broker" unanswered
  • Next action: student starts Syncthing, opens http://127.0.0.1:8384, names the second machine, answers the broker question

[53] Student (2026-10-05)

Hi, i'm ready to take back from where i left

[53] Tutor — actions taken

  • Read-only checks of the Syncthing detour's state: systemctl --user is-enabled syncthing.service → enabled, is-active → active, and the web GUI answers on http://127.0.0.1:8384 (HTTP 200). So the service was started since turn [47].
  • Read ~/.local/state/syncthing/config.xml: one device, this machine (nitro5), and no shared folder configured yet. Step 21 items 2–4 are therefore still open.
  • Schedule check against Schedule.md: Parts II–VIII were due 29 Sep by my inferred mapping; today is 5 Oct, so this part is 6 days past that date — more than the two days that call for a word about it. The next sessions are 06 Oct "Now You Do It" and 13 Oct "Graded Exercise I".

[53] Tutor — reply

Welcome back. Syncthing is running now (enabled, active, GUI up), so that half of the detour is done. Still open: a second device and a shared folder, plus the Step 20 question.

Schedule, honestly: Part III was due 29 Sep by my reading of the plan; it is 5 Oct. The sessions ahead are "Now You Do It" tomorrow and Graded Exercise I on 13 Oct, where your own system and report are presented. Parts IV–VIII (steps 28–53) are what turn the five awkward mediators into the dynamic version the graded exercise wants you to defend, and Part IX (MQTT) is the transport the group work uses. You are free to keep going at your pace, and you can work ahead whenever you like, but if only one thing fits before the 13th, the rewind in Part IV is worth more than finishing Syncthing.

That gives you a choice for right now:

  • (a) Finish Part III properly: pair a second device, share one folder, run the hello.txt test (Step 22), then distribute the five processes across two machines (Step 24) and count what one keystroke costs (Step 25).
  • (b) Park Syncthing at "it runs" and jump to Part IV, the rewind, where the mediators get questioned and the services start subscribing for themselves. The filesystem transport keeps working locally for every later step; only the "two computers" demonstration waits.

Either way, two small things first:

  1. The Step 20 question is still open: why is Syncthing not a message broker, even though our messages travel through it?
  2. If you pick (a): which second machine, and does it have Syncthing yet?

Progress record

  • Current step: 19–20 (Part III); Syncthing installed, enabled and running
  • Last observed result: service active, GUI on http://127.0.0.1:8384, one device (nitro5), no shared folder yet
  • Unresolved problem: six days past the inferred due date for Parts II–VIII; Graded Exercise I on 13 Oct
  • Next action: student answers the broker question and picks (a) finish Part III or (b) park Syncthing and start Part IV

[54] Student

i go with (a), concerning the open question: syncthing is a file synchroniser, it doesn't send any notification or anything, but the apeparence of a file can be used as a trigger, i can also try to install java in a separate docker and then delete it at the end of the tutorial (if it is possible)

[54] Tutor — actions taken

  • Read-only check of the live Syncthing config: devices nitro5, homeserver, Nothing Phone; folders Camera, Documents (/mnt/data/Documents), Downloads, Music, Pictures, Videos, all sendreceive. The course material therefore already replicates to the homeserver, since it lives under /mnt/data/Documents.
  • Read README lines 1415–1491 (Step 24 "Distribute the Five Processes") to give the two-machine split.

[54] Tutor — reply

Step 20 answered correctly, folder choice (a) noted, and the Docker idea works. Sharpened the broker answer, gave the two-machine split for Step 24 and the container shape, and asked for the Step 22 result first.

Progress record

  • Current step: 21–22 (Part III)
  • Last observed result: three paired devices; Step 20 answered (Syncthing replicates, our own WatchService is the trigger)
  • Unresolved problem: dedicated folder not created yet; Java on the homeserver pending (Docker plan)
  • Next action: student creates the shared folder, runs the hello.txt test, and checks a JDK image in Docker

[55] Student (2026-10-06)

Reported the Docker container created on the homeserver with -v ~/course-message-board:/board -v ~/pc-src:/src:ro, container id 3830338da4a9, and "got that" for the file copy.

Earlier in the same exchange: rm -rf ~/'…' failed with permission denied (Docker had created that tree as root), and find ~ -type d -path '*03-static-filesystem' found nothing on the server, which corrected my claim that the Documents replica was already there.

[55] Tutor — actions taken

  • Wrote ~/course-message-board/hello.txt on the laptop (one line, a timestamp) as the laptop half of Step 22's replication test. The folder holds Syncthing's .stfolder marker, so Syncthing owns it.
  • Left the observation on the server side to the student, and asked for two container checks (ls /src, ls -la /board).

[55] Tutor — reply

Asked for: docker exec pc-java ls /src and ls -la /board, then the Step 22 round trip — hello.txt is already written on the laptop, the student checks it appears on the server and deletes it there, and I confirm the deletion arrives here.

Progress record

  • Current step: 22 (Part III)
  • Last observed result: container pc-java running on the homeserver; hello.txt written on the laptop at 00:01
  • Unresolved problem: replication not yet demonstrated in either direction; /src and /board contents inside the container unverified
  • Next action: student reports ls /src, ls -la /board, whether hello.txt arrived, then deletes it on the server

[56] Student

Asked for the log to be redacted — anything sensitive marked with # — and pasted the diagnosis output from the server (redacted here):

#user@#homeserver:~$ ls -ld ~/course-message-board
drwxr-xr-x 2 root root 4096 Oct  5 23:46 ~/course-message-board
ls: cannot access '~/course-message-board/.stfolder': No such file or directory
user=#uid:#gid            # docker inspect -f 'user={{.Config.User}}' pc-java
uid=#uid(#user) gid=#gid(#user) groups=#groups

[56] Tutor — actions taken

  • Redacted the whole log: account names, host names and /home/<user> paths in conv/01-part-I.md and conv/03-part-III.md are now #user, #laptop, #homeserver, ~. Recorded the rule in memory so later turns are redacted as they are written.
  • Read the diagnosis: on the server ~/course-message-board is root-owned and holds no .stfolder, so Syncthing never created it — it is the empty directory Docker made on the first run with my broken placeholder. The container runs as the student's uid, hence the AccessDeniedException.
  • Conclusion: the container is mounting the wrong directory, and the replica that actually received hello.txt lives at a path we have not identified yet.

[56] Tutor — reply

Explained the decoy directory, and asked for sudo find / -xdev -name '.stfolder' -printf '%h\n' on the server to locate the real replica, plus ls -ld on it to decide which user the container should run as.

Progress record

  • Current step: 24 (Part III), blocked on the mount path
  • Last observed result: ~/course-message-board on the server is root-owned with no .stfolder; container user is the student's uid
  • Unresolved problem: the real path of the replicated folder on the server is unknown
  • Next action: student locates the folder with the .stfolder search, reports it and its ownership

⬅ Previous: Part II · Index · Next: Part IV ➡

All parts: Setup & Step 0 · Part I · Part II · Part III · Part IV · Part V · Part VI · Part VII · Parts VIII & IX