17 KiB
Conversation Log — Part III — Make It Actually Distributed · Steps 19–27 (turns 45–)
⬅ Previous: Part II · Index · Next: (not started yet) ➡
All parts: Setup & Step 0 · Part I · Part II · Part III
[45] Student
before doing step 20 i need to syncthing (step 19), as there is only debian and ubuntu how to do it again to install it on my arch?
[45] Tutor — actions taken
- Created this Part III log file, regenerated the nav blocks in all part files, and updated the index in
conv.md. - Read README lines 1289–1413 (Step 21 "Prepare a Shared Course Folder", Step 22 "Verify Syncthing Before Starting the System", Step 23 "Important: Syncthing Is Not a Shared Atomic Filesystem"), so the install advice matches what those steps need.
- Read-only:
pacman -Si syncthing→ official Arch packagesyncthing2.1.5-1 in theextrarepo, depends only onglibcandsqlite. (Earlier: not installed on this machine.)pacman -Flreturned nothing because the file database isn't synced, so I could not check which systemd unit files the package ships. - Nothing installed. Installing changes the student's system, so the student runs the commands.
[45] Tutor — reply
Detour: installing Syncthing on Arch. This belongs to Step 21 ("On every participating computer: install and start Syncthing"). Step 19 only names the tool.
You don't need the Debian/Ubuntu packages. Syncthing is in Arch's official extra repo (observed: syncthing 2.1.5-1).
1. Install and check (you run these, since they change your system):
sudo pacman -S syncthing
syncthing --version
2. See how the package lets you start it. I couldn't check this from here:
pacman -Ql syncthing | grep systemd
3. Start it. Pick one of two ways:
- Foreground, simplest for a first try: run
syncthingin a terminal. It stops when you close that terminal. (Syncthing 2.x reorganised its command line into subcommands. If baresyncthingcomplains,syncthing --helplists them.) - Background, keeps running: if step 2 shows a user unit (a file under
/usr/lib/systemd/user/), usesystemctl --user enable --now <that unit name>.
4. Open the web GUI: Syncthing's default address is http://127.0.0.1:8384. Adding devices and sharing a folder (Step 21, items 2–4) happens there.
Repeat on every other machine you'll use. For Step 21 you need at least two, so the machine question from before still matters.
Back to Step 19–20 when Syncthing runs. Tell me:
- the output of
syncthing --versionand of thepacman -Qlline; - which machines you'll connect;
- still open: why is Syncthing not a message broker, even though messages travel through it?
Progress record
- Current step: 19–20 (Part III), detour: installing Syncthing
- Last observed result:
syncthing 2.1.5-1available inextra; not installed yet - Unresolved problem: which machines to connect; unit file name not verified
- Next action: student installs Syncthing, reports version + unit files, names the machines, answers the "not a broker" question
[46] Student
[matsune@nitro5 ProcessControl]$ sudo pacman -S synchting
[sudo] password for matsune:
error: target not found: synchting
[matsune@nitro5 ProcessControl]$ pacman -Ql syncthing | grep systemd
error: package 'syncthing' was not found
[matsune@nitro5 ProcessControl]$
[46] Tutor — actions taken
- None. Compared the typed package name with the one
pacman -Sireported earlier (syncthing).
[46] Tutor — reply
Observed: the install command asked for synchting (c-h-t), but the package is syncthing (c-t-h: sync + thing). pacman found no such target and installed nothing. That's why the second command says package 'syncthing' was not found: it's correct, just not installed yet.
Retry with the right spelling:
sudo pacman -S syncthing
syncthing --version
pacman -Ql syncthing | grep systemd
Tell me: the output of the last two commands.
Progress record
- Current step: 19–20 (Part III), detour: installing Syncthing
- Last observed result: install failed because of a typo in the package name (
synchting) - Unresolved problem: which machines to connect; "not a broker" question still open
- Next action: student reruns the install with
syncthingand sends the version + unit files
[47] Student
[matsune@nitro5 ProcessControl]$ syncthing --version
syncthing v2.1.5 "Hafnium Hornet" (go1.27.0-X:nodwarf5 linux-amd64) syncthing@archlinux 2026-09-08 10:28:56 UTC [libsqlite3, noupgrade]
[matsune@nitro5 ProcessControl]$
[47] Tutor — actions taken
- Read-only, since the
pacman -Qloutput wasn't pasted:pacman -Ql syncthinglists/usr/bin/syncthing, a system template unit/usr/lib/systemd/system/syncthing@.service, and a user unit/usr/lib/systemd/user/syncthing.service. systemctl --user is-enabled syncthing.service→disabled;is-active→inactive. Nothing was enabled or started. That changes the student's user configuration, so the student runs it.
[47] Tutor — reply
✅ Observed: Syncthing v2.1.5 is installed. I checked the unit files myself: the package ships a user unit, syncthing.service, currently disabled and inactive.
Start it (your choice):
- Background, starts with your session (recommended, since the message board has to sync while your Java programs run):
To undo later:
systemctl --user enable --now syncthing.service systemctl --user status syncthing.servicesystemctl --user disable --now syncthing.service. - Foreground, for a one-off try: run
syncthingin a terminal and leave it open.
Then open http://127.0.0.1:8384 in a browser. You should see the Syncthing web GUI with your own device.
Still needed before Step 21 can work:
- A second machine with Syncthing, since Step 21 connects devices. Which one will you use?
- The open Step 20 question: why is Syncthing not a message broker, even though messages travel through it?
Tell me: whether the GUI opens (and the status line saying active (running), if you used the service), plus answers 1 and 2.
Progress record
- Current step: 19–20 (Part III), detour: installing Syncthing
- Last observed result:
syncthing v2.1.5installed; user unitsyncthing.servicepresent, disabled/inactive - Unresolved problem: second machine unknown; "not a broker" question open
- Next action: student starts Syncthing, opens the GUI, names the second machine, answers the broker question
[48] Student (2026-09-24)
can you move the
ProcessControlfolder from /GitRepo/UniFr/ComputerScience/ to /GitRepo/Notes/ProcessControl? (including the conv)
[48] Tutor — actions taken
- Looked before touching anything:
/GitRepo/Notes/ProcessControlalready existed (created 22 Sep 14:56) and was a second clone of the same repo — same branchmain, same HEADe079932, same remote, same uncommitted log edits, no stashes, no extra branches. diff -rqbetween the two: every working file byte-identical, includingconv/andconv/03-part-III.md. Only.git/configdiffered (the Notes copy has a VS Codevscode-merge-base = origin/mainline) and.git/index(timestamps).- Checked the parent repo
UniFr/ComputerScience: ProcessControl was only ever untracked there (?? ProcessControl/), so nothing tracked depended on it. - Asked the student how to finish, since the destination was occupied and finishing meant deleting a directory. Answer: delete the old folder.
- Re-verified both trees were identical, then
rm -rf /mnt/data/Documents/GitRepo/UniFr/ComputerScience/ProcessControl. Confirmed it's gone and the Notes copy is intact (## main...origin/main, same 5 pending log changes). - Copied the session's project memories (tutor rules, schedule tracking, log layout) to
~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/memory/, a guess at the new project key, so a future session in the new path still has them. The originals were left in place. - This log entry is written in the surviving copy under
/GitRepo/Notes/ProcessControl.
[48] Tutor — reply
Done. The folder now lives only at /GitRepo/Notes/ProcessControl, with conv.md, conv/ and the git history.
Notes for you:
- Your Notes repo sees
ProcessControl/as an untracked embedded repository. If you ever rungit add .inNotes/, git will warn and record only a pointer. I can addProcessControl/toNotes/.gitignoreif you want. - Uncommitted work travelled with the folder: the log edits for turns 41–48 are still uncommitted here.
- I copied my saved project notes to a path matching the new location. If a future session seems to have forgotten the tutoring rules (no answer pre-filling, schedule reminders, per-part log), say so and I'll fix the path.
Progress record
- Current step: 19–20 (Part III), Syncthing detour
- Last observed result: folder moved (old copy deleted after verifying the new one was identical); Syncthing v2.1.5 installed, user unit disabled/inactive
- Unresolved problem: Syncthing not started yet; second machine unknown; "not a broker" question open
- Next action: student starts Syncthing, opens
http://127.0.0.1:8384, names the second machine, answers the broker question
[49] Student
Base on the siblings folder, can you start doing resume/construct quarto course (3lang, OG = English, french and german to do) and add each time I end a step the summary, with diagram (interactive one for the web version)?
[49] Tutor — actions taken
- Studied the sibling courses in
Notes/: the_coursetemplate (NEW-COURSE.md), the sharednotesextension (i18n.lua, glossary, exercises),Analysis(first multilingual course, TikZ figures, an animated html-only figure) andDatabase— the closest model: English default profile,_output/+_output/fr/+_output/de/,i18n.yml, and a figure pipeline of hand-written SVG sources with{{key}}labels built per language to svg (web) and pdf (print). - Asked four questions (book at the repo root · one chapter per tutorial part · Database figure pipeline plus a JS layer · write all three languages now). All four answered with the recommended option.
- Copied the shared boilerplate from
Database:_extensions/notes/,_i18n-switcher.html,theme.scss,figures/build-figures.py,figures/diagram.css. - Wrote the project:
_quarto.yml(+_quarto-en.yml,_quarto-fr.yml,_quarto-de.yml),render-all.sh,.gitignore,preamble.tex,i18n.yml. - Wrote three diagrams as SVG sources with
{{key}}labels and per-language strings infigures/labels.yml:direct-calls,mailboxes-jvm,filesystem-processes(8 flow hops and 9 nodes each for the last two). - Wrote
figures/flow-player.html: for everyimg.flow-figureit fetches the built svg, inlines it and adds a Play / One hop / Reset bar that walks a message along thedata-flowedges, lighting up eachdata-flow-nodeit reaches. The pdf and a browser without JavaScript keep the same still picture. - Wrote the chapters:
index.qmd(about, how to read the diagrams, how to build),00-orientation.qmd(step 0),01-part-i-calls.qmd(steps 1–10) and02-part-ii-processes.qmd(steps 11–18), each in English, French and German, with the observations from our own runs. - Fixed two build problems found on the way: invalid
--inside the svg comments (rsvg-convert refused the files) and hex link colours that xcolor rejected (now named colours defined inpreamble.tex). - Verified:
./render-all.shbuilds all six outputs (html + pdf for en/fr/de). Each book pulls its own language's figures; the sidebar titles are translated. Known cosmetic limitation, identical in theDatabasebook: the pagination links'aria-labelstill shows the raw[..]{.en}[..]{.fr}[..]{.de}heading, because Quarto reads those before the filters run. - Not verified: the animation itself in a real browser. Nothing else depends on it.
[49] Tutor — reply
The book exists and builds in all three languages. Summary of what was created, what was verified, and how the per-step routine works from now on. Nothing was committed yet.
Progress record
- Current step: 19–20 (Part III) — the tutorial itself is untouched by this work
- Last observed result:
./render-all.shbuilt html + pdf for en, fr and de (six outputs) - Unresolved problem: the flow animation is not verified in a browser; deployment (Gitea hook + Caddy) not set up for this course
- Next action: student checks the book in a browser (
./render-all.sh --serve), says whether to commit, and continues the Syncthing detour for Step 19–20
[50] Student
is it possible to move this chat (the one i launch with
claude --resume) to the new folder too as the folder no longer exists?
[50] Tutor — actions taken
- Inspected
~/.claude/projects/: the old key-mnt-data-Documents-GitRepo-UniFr-ComputerScience-ProcessControl/held this live session37a0236e-…jsonl(4.0 MB, still growing), an earlier session7a7a8220-…jsonlwith itscustom-title.jsonsidecar, and thememory/folder (already copied on 24 Sep). The new key-mnt-data-Documents-GitRepo-Notes-ProcessControl/held onlymemory/. - Hard-linked the live transcript into the new project folder (verified: same inode 46550777, link count 2), so it keeps growing under both names while this session runs.
- Copied the earlier session's
.jsonland its sidecar directory to the new folder. Nothing was deleted; the old folder still holds its copies. - Checked
~/.claude.json: both path keys exist, both withhasTrustDialogAccepted: trueand an emptyallowedTools, no MCP servers. Nothing worth migrating, so the file was left untouched. OnlylastSessionIdis missing for the new path, and Claude Code writes that for the current working directory when the session ends.
[50] Tutor — reply
Yes — done, and this session is now resumable from the new folder.
Progress record
- Current step: 19–20 (Part III), Syncthing detour
- Last observed result: session transcripts linked/copied into
~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/ - Unresolved problem: old transcript copies still in place (student's call whether to delete)
- Next action: student resumes from the new folder if they like, and continues the Syncthing setup
[51] Student
Quick question, is possible to have java terminal inside the Quarto file to run the code directly there?
[51] Tutor — actions taken
- Found the house precedent:
FuncLogProg/_extensions/elixir/(elixir-run.lua,runner.exs,elixir-run.css) runs```{.elixir .run}blocks at render time, prints the output under the block, caches results in.elixir-cache/, and degrades to plain code whenelixiris missing. Read the filter in full. - Read-only checks on this machine:
jshell 26.0.2.1present,javapresent, Jupyter has only apython3kernel (no IJava),asciinemanot installed.
[51] Tutor — reply
Answered: a live terminal in the page needs a backend or WASM and cannot run this course's programs; a render-time .run block for Java is the practical option, modelled on the existing Elixir filter. Offered to build _extensions/java/java-run.lua.
Progress record
- Current step: 19–20 (Part III), Syncthing detour
- Last observed result: Elixir run-filter pattern identified as the model;
jshell/javaavailable, no IJava kernel - Unresolved problem: student's decision on whether to build the Java run filter
- Next action: student says yes/no to
java-run, then back to Syncthing
[52] Student
no thx, thx 4 the explanation
[52] Tutor — actions taken
- None. No
java-runfilter is being built; the chapters keep showing commands with their observed output as text.
[52] Tutor — reply
Noted, nothing built. Back to the Syncthing detour for Steps 19–20.
Progress record
- Current step: 19–20 (Part III), Syncthing detour
- Last observed result:
syncthing v2.1.5installed; user unitsyncthing.servicepresent but disabled and inactive - Unresolved problem: Syncthing not started; second machine unknown; "why Syncthing is not a message broker" unanswered
- Next action: student starts Syncthing, opens
http://127.0.0.1:8384, names the second machine, answers the broker question
⬅ Previous: Part II · Index · Next: (not started yet) ➡
All parts: Setup & Step 0 · Part I · Part II · Part III