# Conversation Log — Part III — Make It Actually Distributed · Steps 19–27 (turns 45–) > [⬅ Previous: Part II](02-part-II.md) · [Index](../conv.md) · [Next: Part IV ➡](04-part-IV.md) > > All parts: [Setup & Step 0](00-setup-and-step-0.md) · [Part I](01-part-I.md) · [Part II](02-part-II.md) · **Part III** · [Part IV](04-part-IV.md) · [Part V](05-part-V.md) · [Part VI](06-part-VI.md) · [Part VII](07-part-VII.md) --- ## [45] Student > before doing step 20 i need to syncthing (step 19), as there is only debian and ubuntu how to do it again to install it on my arch? ## [45] Tutor — actions taken - Created this Part III log file, regenerated the nav blocks in all part files, and updated the index in `conv.md`. - Read README lines 1289–1413 (Step 21 "Prepare a Shared Course Folder", Step 22 "Verify Syncthing Before Starting the System", Step 23 "Important: Syncthing Is Not a Shared Atomic Filesystem"), so the install advice matches what those steps need. - Read-only: `pacman -Si syncthing` → official Arch package `syncthing` **2.1.5-1** in the `extra` repo, depends only on `glibc` and `sqlite`. (Earlier: not installed on this machine.) `pacman -Fl` returned nothing because the file database isn't synced, so I could **not** check which systemd unit files the package ships. - Nothing installed. Installing changes the student's system, so the student runs the commands. ## [45] Tutor — reply **Detour: installing Syncthing on Arch.** This belongs to Step 21 ("On every participating computer: install and start Syncthing"). Step 19 only names the tool. You don't need the Debian/Ubuntu packages. Syncthing is in Arch's official `extra` repo (**observed:** `syncthing 2.1.5-1`). **1. Install and check** (you run these, since they change your system): ```bash sudo pacman -S syncthing syncthing --version ``` **2. See how the package lets you start it.** I couldn't check this from here: ```bash pacman -Ql syncthing | grep systemd ``` **3. Start it.** Pick one of two ways: - **Foreground, simplest for a first try:** run `syncthing` in a terminal. It stops when you close that terminal. (Syncthing 2.x reorganised its command line into subcommands. If bare `syncthing` complains, `syncthing --help` lists them.) - **Background, keeps running:** if step 2 shows a *user* unit (a file under `/usr/lib/systemd/user/`), use `systemctl --user enable --now `. **4. Open the web GUI:** Syncthing's default address is `http://127.0.0.1:8384`. Adding devices and sharing a folder (Step 21, items 2–4) happens there. Repeat on every other machine you'll use. For Step 21 you need **at least two**, so the machine question from before still matters. **Back to Step 19–20** when Syncthing runs. Tell me: 1. the output of `syncthing --version` and of the `pacman -Ql` line; 2. which machines you'll connect; 3. still open: why is Syncthing **not** a message broker, even though messages travel through it? **Progress record** - Current step: 19–20 (Part III), detour: installing Syncthing - Last observed result: `syncthing 2.1.5-1` available in `extra`; not installed yet - Unresolved problem: which machines to connect; unit file name not verified - Next action: student installs Syncthing, reports version + unit files, names the machines, answers the "not a broker" question --- ## [46] Student ``` [#user@#laptop ProcessControl]$ sudo pacman -S synchting [sudo] password for matsune: error: target not found: synchting [#user@#laptop ProcessControl]$ pacman -Ql syncthing | grep systemd error: package 'syncthing' was not found [#user@#laptop ProcessControl]$ ``` ## [46] Tutor — actions taken - None. Compared the typed package name with the one `pacman -Si` reported earlier (`syncthing`). ## [46] Tutor — reply **Observed:** the install command asked for `synchting` (**c-h-t**), but the package is `syncthing` (**c-t-h**: sync + thing). pacman found no such target and installed nothing. That's why the second command says `package 'syncthing' was not found`: it's correct, just not installed yet. Retry with the right spelling: ```bash sudo pacman -S syncthing syncthing --version pacman -Ql syncthing | grep systemd ``` **Tell me:** the output of the last two commands. **Progress record** - Current step: 19–20 (Part III), detour: installing Syncthing - Last observed result: install failed because of a typo in the package name (`synchting`) - Unresolved problem: which machines to connect; "not a broker" question still open - Next action: student reruns the install with `syncthing` and sends the version + unit files --- ## [47] Student ``` [#user@#laptop ProcessControl]$ syncthing --version syncthing v2.1.5 "Hafnium Hornet" (go1.27.0-X:nodwarf5 linux-amd64) syncthing@archlinux 2026-09-08 10:28:56 UTC [libsqlite3, noupgrade] [#user@#laptop ProcessControl]$ ``` ## [47] Tutor — actions taken - Read-only, since the `pacman -Ql` output wasn't pasted: `pacman -Ql syncthing` lists `/usr/bin/syncthing`, a system template unit `/usr/lib/systemd/system/syncthing@.service`, and a **user unit `/usr/lib/systemd/user/syncthing.service`**. - `systemctl --user is-enabled syncthing.service` → `disabled`; `is-active` → `inactive`. Nothing was enabled or started. That changes the student's user configuration, so the student runs it. ## [47] Tutor — reply ✅ **Observed:** Syncthing v2.1.5 is installed. I checked the unit files myself: the package ships a **user unit**, `syncthing.service`, currently *disabled* and *inactive*. **Start it** (your choice): - **Background, starts with your session** (recommended, since the message board has to sync while your Java programs run): ```bash systemctl --user enable --now syncthing.service systemctl --user status syncthing.service ``` To undo later: `systemctl --user disable --now syncthing.service`. - **Foreground, for a one-off try:** run `syncthing` in a terminal and leave it open. Then open **`http://127.0.0.1:8384`** in a browser. You should see the Syncthing web GUI with your own device. **Still needed before Step 21 can work:** 1. A **second machine** with Syncthing, since Step 21 connects devices. Which one will you use? 2. The open Step 20 question: why is Syncthing **not** a message broker, even though messages travel through it? **Tell me:** whether the GUI opens (and the `status` line saying `active (running)`, if you used the service), plus answers 1 and 2. **Progress record** - Current step: 19–20 (Part III), detour: installing Syncthing - Last observed result: `syncthing v2.1.5` installed; user unit `syncthing.service` present, disabled/inactive - Unresolved problem: second machine unknown; "not a broker" question open - Next action: student starts Syncthing, opens the GUI, names the second machine, answers the broker question --- ## [48] Student (2026-09-24) > can you move the `ProcessControl` folder from /GitRepo/UniFr/ComputerScience/ to /GitRepo/Notes/ProcessControl? (including the conv) ## [48] Tutor — actions taken - Looked before touching anything: `/GitRepo/Notes/ProcessControl` **already existed** (created 22 Sep 14:56) and was a second clone of the same repo — same branch `main`, same HEAD `e079932`, same remote, same uncommitted log edits, no stashes, no extra branches. - `diff -rq` between the two: every working file byte-identical, including `conv/` and `conv/03-part-III.md`. Only `.git/config` differed (the Notes copy has a VS Code `vscode-merge-base = origin/main` line) and `.git/index` (timestamps). - Checked the parent repo `UniFr/ComputerScience`: ProcessControl was only ever untracked there (`?? ProcessControl/`), so nothing tracked depended on it. - Asked the student how to finish, since the destination was occupied and finishing meant deleting a directory. Answer: **delete the old folder**. - Re-verified both trees were identical, then `rm -rf /mnt/data/Documents/GitRepo/UniFr/ComputerScience/ProcessControl`. Confirmed it's gone and the Notes copy is intact (`## main...origin/main`, same 5 pending log changes). - Copied the session's project memories (tutor rules, schedule tracking, log layout) to `~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/memory/`, a guess at the new project key, so a future session in the new path still has them. The originals were left in place. - This log entry is written in the surviving copy under `/GitRepo/Notes/ProcessControl`. ## [48] Tutor — reply Done. The folder now lives only at `/GitRepo/Notes/ProcessControl`, with `conv.md`, `conv/` and the git history. Notes for you: - Your Notes repo sees `ProcessControl/` as an untracked **embedded repository**. If you ever run `git add .` in `Notes/`, git will warn and record only a pointer. I can add `ProcessControl/` to `Notes/.gitignore` if you want. - Uncommitted work travelled with the folder: the log edits for turns 41–48 are still uncommitted here. - I copied my saved project notes to a path matching the new location. If a future session seems to have forgotten the tutoring rules (no answer pre-filling, schedule reminders, per-part log), say so and I'll fix the path. **Progress record** - Current step: 19–20 (Part III), Syncthing detour - Last observed result: folder moved (old copy deleted after verifying the new one was identical); Syncthing v2.1.5 installed, user unit disabled/inactive - Unresolved problem: Syncthing not started yet; second machine unknown; "not a broker" question open - Next action: student starts Syncthing, opens `http://127.0.0.1:8384`, names the second machine, answers the broker question --- ## [49] Student > Base on the siblings folder, can you start doing resume/construct quarto course (3lang, OG = English, french and german to do) and add each time I end a step the summary, with diagram (interactive one for the web version)? ## [49] Tutor — actions taken - Studied the sibling courses in `Notes/`: the `_course` template (`NEW-COURSE.md`), the shared `notes` extension (`i18n.lua`, glossary, exercises), `Analysis` (first multilingual course, TikZ figures, an animated html-only figure) and **`Database`** — the closest model: English default profile, `_output/` + `_output/fr/` + `_output/de/`, `i18n.yml`, and a figure pipeline of hand-written SVG sources with `{{key}}` labels built per language to svg (web) and pdf (print). - Asked four questions (book at the repo root · one chapter per tutorial part · Database figure pipeline plus a JS layer · write all three languages now). All four answered with the recommended option. - Copied the shared boilerplate from `Database`: `_extensions/notes/`, `_i18n-switcher.html`, `theme.scss`, `figures/build-figures.py`, `figures/diagram.css`. - Wrote the project: `_quarto.yml` (+ `_quarto-en.yml`, `_quarto-fr.yml`, `_quarto-de.yml`), `render-all.sh`, `.gitignore`, `preamble.tex`, `i18n.yml`. - Wrote three diagrams as SVG sources with `{{key}}` labels and per-language strings in `figures/labels.yml`: `direct-calls`, `mailboxes-jvm`, `filesystem-processes` (8 flow hops and 9 nodes each for the last two). - Wrote `figures/flow-player.html`: for every `img.flow-figure` it fetches the built svg, inlines it and adds a Play / One hop / Reset bar that walks a message along the `data-flow` edges, lighting up each `data-flow-node` it reaches. The pdf and a browser without JavaScript keep the same still picture. - Wrote the chapters: `index.qmd` (about, how to read the diagrams, how to build), `00-orientation.qmd` (step 0), `01-part-i-calls.qmd` (steps 1–10) and `02-part-ii-processes.qmd` (steps 11–18), each in English, French and German, with the observations from our own runs. - Fixed two build problems found on the way: invalid `--` inside the svg comments (rsvg-convert refused the files) and hex link colours that xcolor rejected (now named colours defined in `preamble.tex`). - Verified: `./render-all.sh` builds **all six outputs** (html + pdf for en/fr/de). Each book pulls its own language's figures; the sidebar titles are translated. Known cosmetic limitation, identical in the `Database` book: the pagination links' `aria-label` still shows the raw `[..]{.en}[..]{.fr}[..]{.de}` heading, because Quarto reads those before the filters run. - Not verified: the animation itself in a real browser. Nothing else depends on it. ## [49] Tutor — reply The book exists and builds in all three languages. Summary of what was created, what was verified, and how the per-step routine works from now on. Nothing was committed yet. **Progress record** - Current step: 19–20 (Part III) — the tutorial itself is untouched by this work - Last observed result: `./render-all.sh` built html + pdf for en, fr and de (six outputs) - Unresolved problem: the flow animation is not verified in a browser; deployment (Gitea hook + Caddy) not set up for this course - Next action: student checks the book in a browser (`./render-all.sh --serve`), says whether to commit, and continues the Syncthing detour for Step 19–20 --- ## [50] Student > is it possible to move this chat (the one i launch with `claude --resume`) to the new folder too as the folder no longer exists? ## [50] Tutor — actions taken - Inspected `~/.claude/projects/`: the old key `-mnt-data-Documents-GitRepo-UniFr-ComputerScience-ProcessControl/` held this live session `37a0236e-…jsonl` (4.0 MB, still growing), an earlier session `7a7a8220-…jsonl` with its `custom-title.json` sidecar, and the `memory/` folder (already copied on 24 Sep). The new key `-mnt-data-Documents-GitRepo-Notes-ProcessControl/` held only `memory/`. - **Hard-linked** the live transcript into the new project folder (verified: same inode 46550777, link count 2), so it keeps growing under both names while this session runs. - Copied the earlier session's `.jsonl` and its sidecar directory to the new folder. Nothing was deleted; the old folder still holds its copies. - Checked `~/.claude.json`: both path keys exist, both with `hasTrustDialogAccepted: true` and an empty `allowedTools`, no MCP servers. Nothing worth migrating, so the file was left untouched. Only `lastSessionId` is missing for the new path, and Claude Code writes that for the current working directory when the session ends. ## [50] Tutor — reply Yes — done, and this session is now resumable from the new folder. **Progress record** - Current step: 19–20 (Part III), Syncthing detour - Last observed result: session transcripts linked/copied into `~/.claude/projects/-mnt-data-Documents-GitRepo-Notes-ProcessControl/` - Unresolved problem: old transcript copies still in place (student's call whether to delete) - Next action: student resumes from the new folder if they like, and continues the Syncthing setup --- ## [51] Student > Quick question, is possible to have java terminal inside the Quarto file to run the code directly there? ## [51] Tutor — actions taken - Found the house precedent: `FuncLogProg/_extensions/elixir/` (`elixir-run.lua`, `runner.exs`, `elixir-run.css`) runs ```` ```{.elixir .run} ```` blocks **at render time**, prints the output under the block, caches results in `.elixir-cache/`, and degrades to plain code when `elixir` is missing. Read the filter in full. - Read-only checks on this machine: `jshell 26.0.2.1` present, `java` present, Jupyter has only a `python3` kernel (no IJava), `asciinema` not installed. ## [51] Tutor — reply Answered: a live terminal in the page needs a backend or WASM and cannot run this course's programs; a render-time `.run` block for Java is the practical option, modelled on the existing Elixir filter. Offered to build `_extensions/java/java-run.lua`. **Progress record** - Current step: 19–20 (Part III), Syncthing detour - Last observed result: Elixir run-filter pattern identified as the model; `jshell`/`java` available, no IJava kernel - Unresolved problem: student's decision on whether to build the Java run filter - Next action: student says yes/no to `java-run`, then back to Syncthing --- ## [52] Student > no thx, thx 4 the explanation ## [52] Tutor — actions taken - None. No `java-run` filter is being built; the chapters keep showing commands with their observed output as text. ## [52] Tutor — reply Noted, nothing built. Back to the Syncthing detour for Steps 19–20. **Progress record** - Current step: 19–20 (Part III), Syncthing detour - Last observed result: `syncthing v2.1.5` installed; user unit `syncthing.service` present but disabled and inactive - Unresolved problem: Syncthing not started; second machine unknown; "why Syncthing is not a message broker" unanswered - Next action: student starts Syncthing, opens `http://127.0.0.1:8384`, names the second machine, answers the broker question --- ## [53] Student (2026-10-05) > Hi, i'm ready to take back from where i left ## [53] Tutor — actions taken - Read-only checks of the Syncthing detour's state: `systemctl --user is-enabled syncthing.service` → **enabled**, `is-active` → **active**, and the web GUI answers on `http://127.0.0.1:8384` (HTTP 200). So the service was started since turn [47]. - Read `~/.local/state/syncthing/config.xml`: one device, this machine (`nitro5`), and no shared folder configured yet. Step 21 items 2–4 are therefore still open. - Schedule check against `Schedule.md`: Parts II–VIII were due 29 Sep by my inferred mapping; today is 5 Oct, so this part is 6 days past that date — more than the two days that call for a word about it. The next sessions are 06 Oct "Now You Do It" and 13 Oct "Graded Exercise I". ## [53] Tutor — reply Welcome back. Syncthing is running now (enabled, active, GUI up), so that half of the detour is done. Still open: a second device and a shared folder, plus the Step 20 question. **Schedule, honestly:** Part III was due 29 Sep by my reading of the plan; it is 5 Oct. The sessions ahead are "Now You Do It" tomorrow and **Graded Exercise I on 13 Oct**, where your own system and report are presented. Parts IV–VIII (steps 28–53) are what turn the five awkward mediators into the dynamic version the graded exercise wants you to defend, and Part IX (MQTT) is the transport the group work uses. You are free to keep going at your pace, and you can work ahead whenever you like, but if only one thing fits before the 13th, the rewind in Part IV is worth more than finishing Syncthing. That gives you a choice for right now: - **(a) Finish Part III properly:** pair a second device, share one folder, run the `hello.txt` test (Step 22), then distribute the five processes across two machines (Step 24) and count what one keystroke costs (Step 25). - **(b) Park Syncthing at "it runs"** and jump to Part IV, the rewind, where the mediators get questioned and the services start subscribing for themselves. The filesystem transport keeps working locally for every later step; only the "two computers" demonstration waits. **Either way, two small things first:** 1. The Step 20 question is still open: why is Syncthing **not** a message broker, even though our messages travel through it? 2. If you pick (a): which second machine, and does it have Syncthing yet? **Progress record** - Current step: 19–20 (Part III); Syncthing installed, enabled and running - Last observed result: service active, GUI on `http://127.0.0.1:8384`, one device (`nitro5`), no shared folder yet - Unresolved problem: six days past the inferred due date for Parts II–VIII; Graded Exercise I on 13 Oct - Next action: student answers the broker question and picks (a) finish Part III or (b) park Syncthing and start Part IV --- ## [54] Student > i go with (a), concerning the open question: syncthing is a file synchroniser, it doesn't send any notification or anything, but the apeparence of a file can be used as a trigger, i can also try to install java in a separate docker and then delete it at the end of the tutorial (if it is possible) ## [54] Tutor — actions taken - Read-only check of the live Syncthing config: devices `nitro5`, `homeserver`, `Nothing Phone`; folders Camera, Documents (`/mnt/data/Documents`), Downloads, Music, Pictures, Videos, all `sendreceive`. The course material therefore already replicates to the homeserver, since it lives under `/mnt/data/Documents`. - Read README lines 1415–1491 (Step 24 "Distribute the Five Processes") to give the two-machine split. ## [54] Tutor — reply Step 20 answered correctly, folder choice (a) noted, and the Docker idea works. Sharpened the broker answer, gave the two-machine split for Step 24 and the container shape, and asked for the Step 22 result first. **Progress record** - Current step: 21–22 (Part III) - Last observed result: three paired devices; Step 20 answered (Syncthing replicates, our own WatchService is the trigger) - Unresolved problem: dedicated folder not created yet; Java on the homeserver pending (Docker plan) - Next action: student creates the shared folder, runs the `hello.txt` test, and checks a JDK image in Docker --- ## [55] Student (2026-10-06) Reported the Docker container created on the homeserver with `-v ~/course-message-board:/board -v ~/pc-src:/src:ro`, container id `3830338da4a9`, and "got that" for the file copy. Earlier in the same exchange: `rm -rf ~/'…'` failed with permission denied (Docker had created that tree as root), and `find ~ -type d -path '*03-static-filesystem'` found nothing on the server, which corrected my claim that the Documents replica was already there. ## [55] Tutor — actions taken - Wrote `~/course-message-board/hello.txt` on the laptop (one line, a timestamp) as the laptop half of Step 22's replication test. The folder holds Syncthing's `.stfolder` marker, so Syncthing owns it. - Left the observation on the server side to the student, and asked for two container checks (`ls /src`, `ls -la /board`). ## [55] Tutor — reply Asked for: `docker exec pc-java ls /src` and `ls -la /board`, then the Step 22 round trip — `hello.txt` is already written on the laptop, the student checks it appears on the server and deletes it there, and I confirm the deletion arrives here. **Progress record** - Current step: 22 (Part III) - Last observed result: container `pc-java` running on the homeserver; `hello.txt` written on the laptop at 00:01 - Unresolved problem: replication not yet demonstrated in either direction; `/src` and `/board` contents inside the container unverified - Next action: student reports `ls /src`, `ls -la /board`, whether `hello.txt` arrived, then deletes it on the server --- ## [56] Student Asked for the log to be redacted — anything sensitive marked with `#` — and pasted the diagnosis output from the server (redacted here): ``` #user@#homeserver:~$ ls -ld ~/course-message-board drwxr-xr-x 2 root root 4096 Oct 5 23:46 ~/course-message-board ls: cannot access '~/course-message-board/.stfolder': No such file or directory user=#uid:#gid # docker inspect -f 'user={{.Config.User}}' pc-java uid=#uid(#user) gid=#gid(#user) groups=#groups ``` ## [56] Tutor — actions taken - Redacted the whole log: account names, host names and `/home/` paths in `conv/01-part-I.md` and `conv/03-part-III.md` are now `#user`, `#laptop`, `#homeserver`, `~`. Recorded the rule in memory so later turns are redacted as they are written. - Read the diagnosis: on the server `~/course-message-board` is **root-owned and holds no `.stfolder`**, so Syncthing never created it — it is the empty directory Docker made on the first run with my broken placeholder. The container runs as the student's uid, hence the `AccessDeniedException`. - Conclusion: the container is mounting the wrong directory, and the replica that actually received `hello.txt` lives at a path we have not identified yet. ## [56] Tutor — reply Explained the decoy directory, and asked for `sudo find / -xdev -name '.stfolder' -printf '%h\n'` on the server to locate the real replica, plus `ls -ld` on it to decide which user the container should run as. **Progress record** - Current step: 24 (Part III), blocked on the mount path - Last observed result: `~/course-message-board` on the server is root-owned with no `.stfolder`; container user is the student's uid - Unresolved problem: the real path of the replicated folder on the server is unknown - Next action: student locates the folder with the `.stfolder` search, reports it and its ownership --- > [⬅ Previous: Part II](02-part-II.md) · [Index](../conv.md) · [Next: Part IV ➡](04-part-IV.md) > > All parts: [Setup & Step 0](00-setup-and-step-0.md) · [Part I](01-part-I.md) · [Part II](02-part-II.md) · **Part III** · [Part IV](04-part-IV.md) · [Part V](05-part-V.md) · [Part VI](06-part-VI.md) · [Part VII](07-part-VII.md)